Garelick/EEz-In 71036:01 Marine Outboard Motor Tilter

Garelick/EEz-In Garelick/EEz-In 71036:01 Marine Outboard Motor Tilter 71036:01

• Leverage tool for use with manual lift motors
• Tilts motors back easier with less strain
• Adjustable to fit shroud of outboards with hand holds
• Compact for stowage
• All contact points protected

Garlicky/EEz-In Marine Outboard Motor Tilter is a leverage tool for use with manual lift motors. Tilts motors back easier with less strain. Adjustable to fit shroud of outboards with hand holds. Compact for stowage. All contact points protected.

Garelick/EEz-In Garelick/EEz-In 71036:01 Marine Outboard Motor Tilter 71036:01

SeaSucker Vacuum Mount Accessory - Yoebi Stemware Holder

SeaSucker SeaSucker Vacuum Mount Accessory - Yoebi Stemware Holder

• Easy to Use - attaches and removes in seconds
• Powerful - a 6" SeaSucker can hold more than 200 pounds
• Versatile - any accessory you can mount to a SeaSucker you can mount on your boat
• Reusable - move the SeaSucker wherever you need it

Insert only (does not included SeaSucker cup holder pictured). The incredibly innovative Yoebi stemware holder lets you hold your wine glass, margarita glass, martini glass and other stemware easily yet securely. The Yoebi slides right in to the 3 1/2" (approx. inside diameter) cup holder already on your boat (or found in most SeaSucker cup holders). Holds most stemware with bases up to 3 1/8". Specify white, black or beige when ordering.SeaSuckers are powerful vacuum-cup mounts that enable you to safely and securely attach an array of accessories to your boat without using screws or drilling holes.The vast superiority of SeaSucker vacuum cups comes from their integrated pumps. Once mounted, they really hold - a 4.5" SeaSucker can support more than 100 pounds; a 6" SeaSucker can support more than 200 pounds. For even more holding power, multiple SeaSuckers can be attached to an aluminum track mount. The vacuum cups are non-marking, and SeaSuckers can hold underwater, and the pump is made to work both underwater and in the air. SeaSuckers are made of rubber, plastic and stainless steel to withstand saltwater. SeaSuckers have a built in safety feature in their check valves. If the red line shows, you know you need to just give your SeaSucker another couple of pumps to get back to full vacuum power strength.

SeaSucker SeaSucker Vacuum Mount Accessory - Yoebi Stemware Holder

Deck Fill With Slotted Cap Deck Fill Key-Ss

Sea Dog Line Deck Fill With Slotted Cap Deck Fill Key-Ss

• Size 1-3/16 L

All caps include attachment chains.

LED Cup Holder - Battery Operated - White

Prime Industries, Inc. LED Cup Holder - Battery Operated - White

• LED Cup Holder-Battery Operated-White Light
• The Lighted Beverage Holder is a stand-alone part with a captive battery supply and on/off switch.
• Requires 4-AAA batteries not included
• This product emits a White light. Other available colors are Red, Green, Blue and Gold.

LED Features:* Soft light for evening use* 304-grade polished and passivated SST trim ring over the top of the lip on the beverage holder, outlines LED light to flow to the sides, illuminating the beverage holder's lip* Unique design allows use with most SST and plastic beverage holders in current boats* Made from opaque polymer material and acrylics* UV-enhanced foam insulator pad adhered to inside bottom.Stainless Steel Cup Holder included:* SST drink cup holder insert with drain*304-grade polished and passivated for 200 hour salt spray test* Outside diameter 92mm*UV-enhanced foam insulator pad adhered to inside bottom.

TH Marine Designer Screw Down Plate, 8 in. - DSSDP22DP

T. H. Marine TH Marine Designer Screw Down Plate, 8 in. - DSSDP22DP

• OD 8 in

TH Marine Designer Screw Down Plate made from tough non-corrosive poly material. Flanged to fit hole securely. Textured top - smooth tapered edges. Size: 8in.

Sea Dog Line Stainless Long Reach Hatch Hinge

Sea Dog Line Sea Dog Line Stainless Long Reach Hatch Hinge 635288

• SEA DOG 2052851

LONG REACH HATCH HINGE is an investment cast 316 S.S. Size L" x W" 3-1/2 x 2-7/8

Garelick/EEz-In 35029-62:01 Marine Anodized Aluminum Padded Deck Chair

Garelick/EEz-In Garelick/EEz-In 35029-62:01 Marine Anodized Aluminum Padded Deck Chair 35029-62

• Comfort and durability
• Padded canvas
• Anodized frame

Lightweight, sturdy and very comfortable, this chair features 1" thick foam padded back and thigh support for added lumbar support. Double leg and front cross bar frame for stability and easy to stow. Weather proof Olefin fabric is embroidered with code flag design. 1'' diameter corrosive resistant folding anodized aluminum frame with poly tips.

Varnished hardwood arms

Navy Blue

Model 35029

Sh. Wt. 14 lbs

Sea Dog 2243001 PUSH BUTTON RIM LATCH - CHROME PUSH BUTTON RIM LATCH

Sea Dog Line Sea Dog 2243001 PUSH BUTTON RIM LATCH - CHROME PUSH BUTTON RIM LATCH

• Finish Polished Chrome
• D 1
• C 2-1/16
• B 1-7/8

Includes both strike plates. Fastener # 6 RH.

SeaSucker Vacuum Mounted Marine Dry Box (Large) - Horz. Mount w/4 1/2 Cup "

SeaSucker SeaSucker Vacuum Mounted Marine Dry Box (Large) - Horz. Mount w/4 1/2 Cup "

• Easy to Use - attaches and removes in seconds
• Powerful - a 6" SeaSucker can hold more than 200 pounds
• Versatile - any accessory you can mount to a SeaSucker you can mount on your boat
• Reusable - move the SeaSucker wherever you need it

You'll never be short of waterproof storage again - the 7 1/2 x 3 1/2 x 3 1/2 (approx) Dry Box is big enough for your wallet, cell phone, camera, cigars, etc. It seals tight to keep water out, and it holds firmly to your dash or other horizontal surface with our powerful 4 1/2" SeaSucker. Two clips snap tight to keep the lid closed. SeaSuckers are powerful vacuum-cup mounts that enable you to safely and securely attach an array of accessories to your boat without using screws or drilling holes.The vast superiority of SeaSucker vacuum cups comes from their integrated pumps. Once mounted, they really hold - a 4.5" SeaSucker can support more than 100 pounds; a 6" SeaSucker can support more than 200 pounds. For even more holding power, multiple SeaSuckers can be attached to an aluminum track mount. The vacuum cups are non-marking, and SeaSuckers can hold underwater, and the pump is made to work both underwater and in the air. SeaSuckers are made of rubber, plastic and stainless steel to withstand saltwater. SeaSuckers have a built in safety feature in their check valves. If the red line shows, you know you need to just give your SeaSucker another couple of pumps to get back to full vacuum power strength.

Battery Test Switch

Sea Dog Line Battery Test Switch 10-10002

• SEA DOG 4220201

BATTERY TEST SWITCH is 2-1/2" in height. Width is 3-1/4".

SeaSucker Vacuum Mounted Marine Fly Fishing Rod Holder w/4 1/2 inch cup

SeaSucker SeaSucker Vacuum Mounted Marine Fly Fishing Rod Holder w/4 1/2 inch cup

• Easy to Use - attaches and removes in seconds
• Powerful - a 6" SeaSucker can hold more than 200 pounds
• Versatile - any accessory you can mount to a SeaSucker you can mount on your boat
• Reusable - move your SeaSucker wherever you need it

Finally, a fly-rod holder you can take with you and mount anywhere! No more trying to make your fly rod fit into conventional/spinning rod holders. It's the well-designed "Del Stang" fly rod holder by Blue Water Designs, securely attached to a 4 1/2" SeaSucker. A Velcro strap at the top keeps your rod in place when on the move. Will also handle smaller spinning rods - this is the unit SeaSucker recommends when you?re bringing some light tackle along on your JetSki or WaveRunner.SeaSuckers are powerful vacuum-cup mounts that enable you to safely and securely attach an array of accessories to your boat without using screws or drilling holes. NO drills, screws or holes.Make no mistake - these are vacuum cups, not suction cups. There's a big difference between the two. The vast superiority of SeaSucker vacuum cups comes from their integrated pumps. Once mounted, they really hold - a 4.5" SeaSucker can support more than 100 pounds; a 6" SeaSucker can support more than 200 pounds.The vacuum cups are non-marking, and SeaSuckers can hold underwater, and the pump is made to work both underwater and in the air. SeaSuckers are made of rubber, plastic and stainless steel to withstand saltwater. But the company does recommend rinsing with freshwater after a trip, like boaters do with anything exposed to the salt.You can use a SeaSucker to mount just about anything to your boat. SeaSucker custom housing lets you choose between screwing into the standard 1/4-20 stainless steel center insert or back-plating through the slotted holes. SeaSuckers have a built in safety feature in their check valves. If the red line shows, you know you need to just give your SeaSucker another couple of pumps to get back to full vacuum power strength.

Davis AV Antenna Mounted Wind Vane (15-Inch)

Davis Davis AV Antenna Mounted Wind Vane (15-Inch) 323430

• DAVIS INSTRUMENTS 3160

This complete kit that allows you to install a Windex 15" vane to any Shakespear, Metz or other brand whip antenna. Sailors have been doing this installation themselves for many years by taking apart a standard Windex 15" vane and installing the parts onto these kinds of antennas. The Windex AV is a much more economical way of doing this. Comes with Teflon® bearing washers, adjustable stainless tacking arms and reflectors underneath the tabs and wind vane. Reduce masthead clutter by combining two installations into one!

Sea Dog Line Stainless Hatch Adjuster (11-Inch)

Sea Dog Line Sea Dog Line Stainless Hatch Adjuster (11-Inch) 606776

• Highly Recommended.
• Satisfaction Ensured.
• High quality.

Formed and Stamped 304 Stainless/Nylon

Springfield Marine 1610415-S 15" Satin Standard Kingpin Marine Post

Springfield Marine Springfield Marine 1610415-S 15" Satin Standard Kingpin Marine Post 1610415-S